Saturday, May 19th

Last update:10:29:00 AM GMT

You are here: Supplier News AP Haslam AP Haslam - Energy Recovery Fans

AP Haslam - Energy Recovery Fans

E-mail Print

AP Haslam would like to introduct the Tempero energy recovery fan. Tempero is an extractor fan provided with an energy recovery system ideal for single room domestic applications.

Tempero is an extractor fan provided with an energy recovery system ideal for single room domestic applications.

It offers healthier and better indoor environment by moderating the temperature of the incoming air plus economic advantages due to energy saving.

The flow of extracted air transfers thermal energy to the fresh incoming air, first through the surface of the internal ducting pipe fitted into the existing duct and then through the “cross flow plates” heat recovery core located in the unit. During this process the incoming and outgoing air flows are completely separated.

During winter season, Tempero guarantees an efficient energy recovery of up to 70%.

During summer season, Tempero reduces substantially the energy required for air conditioning.

Suitable for wall applications, it can be easily fitted to 100 and 120 mm new or existing ducts, offering the opportunity to renovate, substituting old/non functioning axial fans without further invasive procedures to the building structure.

The heat recovery core of PVC cross flow plates is equipped with two easily removable filters for simple and regular cleaning.

Tempero has been conceived and designed to work as a usual air extractor fan with the advantage of added energy conservation.

In normal conditions Tempero will not produce enough condensation to require drainage.

It has been equipped with a dedicated condensation drainage hole thus eliminating the build up of excess condensation related to the certain environmental conditions (temperature, humidity ...) and/or continuous use.

Tempero has been designed to work also in cold climates of –25°C, thanks to a pre-heating coil available for the PH model only.

The Tempero PH model pre-heater, is a 350 W coil fitted in the ducting pipe. When the outside temperature falls below –5°C a thermostat activates the coil thus heating incoming air to about 15-20°C avoiding ice build-up on the recovery module.

To contact us see below...

www.aphaslam.ie